www3003.com(中国)有限公司-首页

服务热线: 400-117-8816
           13406879330

扭剪螺栓专用扳手,扭剪扳手,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心电动扭剪扳手的日常维护要注意什么?

电动扭剪扳手的日常维护要注意什么?

来源: 日期:2023-05-04 发布人:admin

为避开使用电动扭剪扳手时发生火灾、触电、人身损害、机械损害等事故,使用电动剪切钳时须严格遵守以下平安规定。

To avoid accidents such as fire, electric shock, personal injury, mechanical damage, etc. when using electric shear wrenches, the following safety regulations must be strictly followed when using electric shear wrenches.
电源电压不得超过电动扳手铭牌上额定电压的10%。
The power supply voltage shall not exceed 10% of the rated voltage on the nameplate of the electric wrench.
扳手使用的电源插座须与扳手上的电源插头匹配,输入侧的电源(电缆托架)须配备漏电爱护器。
The power socket used for the wrench must match the power plug on the wrench, and the power supply (cable tray) on the input side must be equipped with a leakage protector.
电动扭剪扳手的本体、电线和漏电爱护器须完好无损。
The body, wires, and leakage protector of the electric torsion wrench must be intact and undamaged.
扭剪电动扳手
高空作业时,扳手须系上平安绳。
When working at height, the wrench must be tied with a safety rope.
不允许在潮湿或雨天使用,或在储存易燃易爆气体的地方使用。
It is not allowed to use it in damp or rainy days, or in places where flammable and explosive gases are stored.
使用时应正确选择合适的套筒。
Proper selection of sleeves should be made during use.
根据要求穿戴工作服、平安帽和平安带,以在操作过程中保持身体平衡。
Wear work clothes, safety helmets, and safety belts as required to maintain body balance during operation.
不要拉动扳手.上的钢丝,也不要通过拉动钢丝来拉动插头。
Do not pull the wire on the wrench, nor do you pull the plug by pulling the wire.
使用后,准时拔掉电源插头。
After use, unplug the power plug promptly.
本文由扭剪扳手厂家进行编写,想要了解更多的产品及更详细的精彩内容,请关注我们的网站:我们将为您呈现更多的内容。
This article is written by the manufacturer of torsion wrenches. For more products and detailed exciting content, please follow our website: We will present more content for you.

Baidu
sogou