www3003.com(中国)有限公司-首页

服务热线: 400-117-8816
           13406879330

扭剪螺栓专用扳手,扭剪扳手,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心扭剪型电动扳手是否需要校验

扭剪型电动扳手是否需要校验

来源: 日期:2024-01-10 发布人:创始人

扭剪型电动扳手不需要校验。

The torsion shear electric wrench does not require calibration.

扭剪型电动扳手不像定扭矩电动扳手,需要校验扭矩的精度,是否准确,扭剪型电动扳手只是将扭剪型高强螺栓的梅花头打断,既是完成了它的工作目的。

Unlike fixed torque electric wrenches, torsion shear electric wrenches require verification of torque accuracy. They only break the plum blossom head of the torsion shear high-strength bolt, completing their work purpose.

20230426105211520.jpg

因为扭剪型电动扳手在使用时,将扭剪型电动扳手头对准扭剪型高强螺栓头,扣动开关即可开始工作,几秒后,螺栓梅花头将被扭断,抽出扳手扣动扳机将梅花头弹出,即结束工作。

Because when using the torsion shear type electric wrench, align the head of the torsion shear type electric wrench with the high-strength bolt head, press the switch to start working. After a few seconds, the bolt plum blossom head will be twisted and broken. Pull out the wrench and pull the trigger to pop out the plum blossom head, which ends the work.

本文由扭剪扳手厂家友情奉献.更多有关的知识请点击:我们将用真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from a manufacturer of torsion wrenches. For more information, please click on: We will provide you with comprehensive service with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned

Baidu
sogou