www3003.com(中国)有限公司-首页

服务热线: 400-117-8816
           13406879330

扭剪螺栓专用扳手,扭剪扳手,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>技术文献电动扭矩扳手对于高强螺栓的拧紧的使用

电动扭矩扳手对于高强螺栓的拧紧的使用

来源: 日期:2024-01-05 发布人:创始人

1、高强螺栓的紧固须分为两次进行,次为初拧,初拧紧固到螺栓标准轴力(即预拉力)的60%-80%,初拧的扭矩值不得小于终拧扭矩值的30%,第二次紧固为终拧,为使螺栓群中所有螺栓均匀受力,初拧、终拧都应严格按照紧固顺序操作,按“米”字型对称操作。

1. The tightening of high-strength bolts must be carried out in two stages. The first stage is the initial tightening, which should be tightened to 60% -80% of the standard axial force (i.e. pre tension) of the bolt. The initial tightening torque value should not be less than 30% of the final tightening torque value. The second stage is the final tightening. In order to ensure that all bolts in the bolt group are evenly stressed, both the initial and final tightening should be strictly operated in the tightening sequence, symmetrically in the "meter" shape.

2、初拧完毕的螺栓,应做好标记以供确认,为防止漏拧,当天安装的螺栓,当天应终拧完毕,不得在雨天安装螺栓,且摩擦面应处于干燥状态,终拧扭矩须按设定值要求进行。

2. The bolts that have been initially tightened should be marked for confirmation. To prevent missing tightening, bolts installed on the same day should be fully tightened on the same day. It is not allowed to install bolts on rainy days, and the friction surface should be in a dry state. The final tightening torque should be according to the set value requirements.

3、严格按照电动扭矩扳手操作规程进行操作,每次用完扳手后一定要归零,以免造成弹簧的金属疲劳,应定期校准标定扳手的扭矩值,其偏差不大于5%。

20210310025946687.png

3. Strictly follow the operating procedures for electric torque wrenches. After each use, the wrench must be reset to zero to avoid metal fatigue of the spring. The torque value of the calibrated wrench should be calibrated regularly, with a deviation of no more than 5%.

4、假设紧固螺栓的力矩或预紧力很准,但由于外力,温度变化、振动等因素,一段时间后的预紧力仍会变化,仍须校核。

4. Assuming that the torque or pre tightening force for tightening bolts is accurate, but due to external forces, temperature changes, vibrations, and other factors, the pre tightening force will still change after a period of time and still needs to be verified.

感谢您的阅读,此文的文章来源:扭剪扳手更多的内容和问题请点击:我们会继续努力的为您提供服务,感谢您的支持!

Thank you for reading. The source of this article is the price of a torsion wrench. For more information and questions, please click: We will continue to work hard to provide you with services. Thank you for your support!

Baidu
sogou